CO2-Incubator ICO105med, 107l, 18-50°C, CO2 control 0-20%

CO2-Incubator ICO105med, 107l, 18-50°C, CO2 control 0-20%
Prekė gali skirtis nuo prekės, parodytos nuotraukoje
 
Užsakymo numeris.: ICO105med 6.613,00 € Kaina už 1 vnt. be PVM (21%) plius siuntimo išlaidos
vnt.
CO2 Incubator ICO105med, medical device, TwinDISPLAY, 107 l, working-temperature range 5 °C above ambient temperature to 50 °C, setting range 18 °C to 50 °C, with CO2 control - with dual beam NDIR system - adjustable from 0 % - 20 %, humidity limitation by a Peltier element, when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2,5 %, electronic microprocessor temperature controller with Pt100 and auto-diagnostic system, fully insolated stainless steel door and heated inner glass door, all-round heating on 6 sides, stainless steel housing and interior; with 1 water dish, with 2 stainless steel shelves; multiple overtemperature protection/undertemperature alarm, standard sterilisation programme; works calibration certificate at +37 °C, 5 % CO2; textured stainless steel exterior: 719 x 850 x 591 mm; stainless steel interior: 560 x 480 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1300 W
daugiau
(-) Techniniai duomenys:
Nominalus tūris: 107 l
Minimali darbinė temperatūra: 25 °C
Maksimali darbinė temperatūra: 50 °C

Accessories:

  • ICO105medB04714
    External measuring instrument with additional measuring head for temperature and
  • ICO105medB29744
    Stacking set (4 pcs) for stacking of appliances of same size
  • ICO105medB33170
    USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (Use
  • ICO105medB33505
    Subframe (622 mm high) adjustable in height (sizes 150/240: should not be used f
  • ICO105medB33508
    Subframe (130 mm high); sizes 150/240: only in combination with the correspondin
  • ICO105medB38737
    Water dish
  • ICO105medD00124
    IQ/OQ/PQ checklist
  • ICO105medD00131
    Calibration - temperature, humidity and CO2 value - freely selectable
  • ICO105medD00143
    Calibration - temperature, humidity, CO2 and O2 value - freely selectable
  • ICO105medD38897
    IQ/OQ document incl. empty chamber distribution measurement according to DIN 128
  • ICO105medE02087
    CO2 pressure reducing valve to DIN 8546, incl. gas cylinder monitor
  • ICO105medE06162
    N2 pressure reducing valve to DIN EN ISO 2503, incl. gas cylinder monitor (requi
  • ICO105medE06189
    Ethernet connection cable 5 m for computer interface
  • ICO105medE06192
    USB-Ethernet adapter
  • ICO105medE37418
    Perforated stainless steel shelf
  • ICO105medFDAQ1
    Software conforming to FDA AtmoCONTROL. Meets the requirements for the use of el
  • ICO105medFDAQ2
    Integration of additional units (up to max. 31 units) into an already existent F
  • ICO105medGA3Q5
    Guarantee extension by 1 year - ICO: all sizes
  • ICO105medZWVR6
    Central water supply, with filter cartridges for connection to the domestic wate
  • ICO105medZWVR7
    Central water supply, without filter cartridges for connection to the domestic w

 

Nustatymai:

  • ICO105medD00106
    Calibration - three CO2 values (5% CO2, 7% CO2, 10% CO2 at +37 °C)
  • ICO105medF7
    Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by si
  • ICO105medK4
    Heated inner door with partitioned glass doors; size105/150/240 has 2/3/4 partit
  • ICO105medK6
    Capacitive humidity sensor for measuring and displaying the relative humidity
  • ICO105medK7
    Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh),
  • ICO105medT2
    Electropolished interior
  • ICO105medT6
    Control of oxygen concentration by N2 inlet; adjustment range 1 % up to 20 % O2
  • ICO105medX2
    Voltage 115 V, 50/60 Hz

 

Option of:

  • ICO105
    CO2-Incubator ICO105, 107l, 18-50°C, CO2 control 0-20%