LaboStar Pro DI 2

Prekė gali skirtis nuo prekės, parodytos nuotraukoje

 

LaboStar Pro DI 2 - Ultrapure water systems, 1,5 l/min

HIGHEST WATER QUALITY

The LaboStar PRO DI 2 system is a cost effective means of producing analytical grade water. This extremely compact ultra pure water system can be used on a laboratory bench. The water produced by the system has a conductivity of 0.055 µS/cm (equivalent to 18.2 MΩ-cm) and a TOC value of 5-10 ppb. The water produced exceeds current quality standards.
The LaboStar® system is fed with either deionized water, distilled water or permeate from a reverse osmosis unit. A conductivity meter in the recirculation section continually monitors the purity of the product water. A 0.2 µm positively charged sterile filter at the dispenser removes bacteria and endotoxins. It makes it possible to produce pure water with
an endotoxin value of < 0.001 EU/ml without the need for any further investment in an expensive ultra filter. An uncharged 0.2 µm sterile filter is also available.

Technical specifications:

Ultrapure water specifications:
Dispense rate: 1.5 l/min
Conductivity at 25ºC: 0.055 µS/cm
Resistivity at 25ºC: 18.2 MOhm-cm
TOC: 5 - 10 ppb
Bacteria**: < 0,1 CFU/ml
Endotoxins**: < 0.001 EU/ml
Particulates >0.2 µm/ml: < 1
**with charged sterile filter

Feed water specifications:
Pressure: 0.1 - 6 bar
Conductivity: < 20 µS/cm
Colloid index (SDI): < 3
Free Chlorine: < 0.1 mg/l
Total Iron: < 0.1 mg/l
CO2: < 15 mg/l
SiO2: 2 ppm
Temperature: 5 - 30ºC

Mains input: 100-240 V, 50-60 Hz
Power consumption: max. 270 W
Water connection:
1/2" or 3/4" female thread
Power lead with plug (D;GB;USA):
1.5 m / 1.7 m

Dimensions and Weight
Height: 535 mm
Width: 400 mm
Depth: 410 mm
Dispatch weight: 21 kg