LaboStar 10 RO DI

Prekė gali skirtis nuo prekės, parodytos nuotraukoje

 

LaboStar 10 RO DI - Reverse Osmosis pure water system with integrated 7l-Tank

The LaboStar 10 RO DI system has a small foot print and produces pure water with a quality of up to 10 MΩ-cm. The versatile system includes a 7 L storage tank with the option of adding a 30 l or 60 l tank.
Pure water is collected in the tank and is recirculated by an integrated pump. LaboStar RO DI is equipped with a final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. The unit offers two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available.
The LaboStar RO DI system is delivered with the first set of all modules and filters required for immediate operation.

Feed water specifications:
Pressure: 0.1 - 5 bar
Conductivity: < 2000 µS/cm
TDS: < 1000 mg/l
Colloid index (SDI): < 3
Free Chlorine: < 0.1 mg/l
Total Iron: < 0.1 mg/l
Temperature: 5 - 30ºC

Pure water production into tank: 10 l/hour
Ultrapure water dispense rate: 1.2 l/min

Ultrapure water specifications:
Conductivity at 25ºC: <0.1 µS/cm
Bacteria*: < 0,1 CFU/ml
Particulates >0.2 µm/ml*: <1
Endotoxins**: < 0.001 EU/ml
Mains input: 100-240/ 50-60 V/Hz
Power consumption: max. 184 W
Feed water connection: 5/16" 3/4" FPT
Permeate water connection: 1/4"
Concentrate, drain connection: 3/8"

*with sterile filter
**with charged sterile filter

Dimensions and Weight:
Height: 535 mm
Width: 290 mm
Depth: 400 mm
Dispatch weight: 24 kg