Panašios prekės mortar P-0 hardmetal tungsten carbide

Prekė gali skirtis nuo prekės, parodytos nuotraukoje

Savybės:

Gamintojas:	Fritsch
Kategorija:	Vibraciniai malūnai Show all Vibraciniai malūnai from Fritsch

Prekės numeris	Aprašymas	Kaina
40011008	mortar P-0 hardmetal tungsten carbide General material specification: Material: hardmetal tungsten carbide - WC - GC10 Abrasion resistance: very good Suitable for: hard, abrasive samples, very suitable for cryogenic grinding	5.845,36 Euro Kaina už 1 vnt.
40012009	mortar P-0 hardened, stainless steel General material specification: Material: hardened steel - 1.2080 Abrasion resistance: good Suitable for: medium-hard, brittle samples, suitable for cryogenic grinding	1.325,50 Euro Kaina už 1 vnt.
40014006	mortar P-0 sintered corundum-1 General material specification: Material: sintered corundum 1 - 99.7 % Al2O3 Abrasion resistance: fairly good Suitable for: medium-hard, fibrous samples	2.615,80 Euro Kaina už 1 vnt.
40015005	mortar P-0 agate General material specification: Material: agate - SiO2 Abrasion resistance: good Suitable for: soft to medium-hard samples	Klausti kainos Kaina už 1 vnt.
40017005	grinding ball 50 mm agate General material specification: Material: agate - SiO2 Abrasion resistance: good Suitable for: soft to medium-hard samples It is also offered a grinding ball made of Agate with 70 mm dia. This 70 mm grinding ball causes a higher application of energy, but...	452,10 Euro Kaina už 1 vnt.
40017006	grinding ball 50 mm sintered corundum-1 General material specification: Material: sintered corundum 1 - 99.7 % Al2O3 Abrasion resistance: fairly good Suitable for: medium-hard, fibrous samples	371,80 Euro Kaina už 1 vnt.
40019009	grinding ball 50 mm hardened, stainless steel General material specification: Material: hardened steel Abrasion resistance: good Suitable for: medium-hard, brittle samples	139,15 Euro Kaina už 1 vnt.
40020008	grinding ball 50 mm hardmetal tungsten carbide General material specification: Material: hardmetal tungsten carbide - WC - GC10 Abrasion resistance: very good Suitable for: hard, abrasive samples	1.859,13 Euro Kaina už 1 vnt.
40021005	grinding ball 70 mm agate General material specification: Material: agate - SiO2 Abrasion resistance: good Suitable for: soft to medium-hard samples The grinding ball made of agate with 50 mm dia. is recommended as standard.	994,40 Euro Kaina už 1 vnt.
40022027	mortar P-0 zirconium oxide General material specification: Material: zirconium oxide ZrO2 Abrasion resistance: very good Suitable for: fibrous, abrasive samples	4.789,40 Euro Kaina už 1 vnt.
40023027	grinding ball 50 mm zirconium oxide General material specification: Material: zirconium oxide ZrO2 Abrasion resistance: very good Suitable for: fibrous, abrasive samples	1.004,30 Euro Kaina už 1 vnt.